JAI TMC-4200GE User Manual download pdf (Page 60)

Page 48

TM-4200GE Hardware

Installation

8.2 Camera Setup

8.2.1 Heat Dissipation

The TM-4200GE is a compact 2k by 2k camera. Since all the electronics have been packed in a compact

package, the outer case of the camera can become hot due to heat dissipation. For optimal performance,

JAI Inc. recommends using a cooling fan to set up a positive air flow around the camera and following

the precautions below.

• Mount the camera on a large heat sink (camera bracket) made out of heat-conductive material like

aluminum.

• Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive

material like plastic.

• Make sure the camera has enough open space around it to facilitate the free flow of air.

Please contact JAI Inc. at (800) 445-5444 or send an E-mail to [email protected] if you have any

questions.

8.2.2 Connector Pin Configurations

8.2.2 (a) 12-Pin Connector

The TM-4200GE has a 12-pin Hirose connector for power input as shown in Figure 49.

FIGURE 49. 12-Pin Connector Pinouts

Pin #1 is Ground and pin #2 is +12V DC. Table 6 shows the pin-out table.

TABLE 6. 12-Pin Connector

Pin Description Pin Description

1 GND 7 External VD

2 +12V DC 8 Strobe

3 GND 9 External HD

4 Analog Video 10 Reserved

5 GND (digital) 11 Reserved

6 VINIT in 12 Reserved

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 91 92

No comments

JAI TMC-4200GE User Manual Page 60