JAI TMC-4200GE User Manual download pdf (Page 17)

Page 5

TM-4200GE Software

Software Introduction

FIGURE 5. Select Camera Window

Go to the Acquisition tab and click Start. An image stream should appear.

6. Click on the Configure button at the bottom of the Coyote screen, and open the GigE Camera Soft-

ware dialog box. This is your integrated control software.

Note: The color version (TMC-4200GE) requires that color interpolation be performed in the

frame grabber or by using the host computer’s CPU. In default mode, the camera

supports 2 x 2 color interpolation. For better color performance, the user can select 3 x 3

interpolation in the Camera Interface Application. Return to the Acquisition tab of the

Coyote (previous) screen, and click Configure. In the Advanced Configuration Window,

select the Pixel Type tab. Make sure the camera is set to the proper color space and pixel

depth, and then click the check-box labeled Use 3 x 3 Bayer Interpolation in the

Conversion Options panel. More information on color interpolation and the color filter

array (CFA) can be found in Section 9.2 on page 58 of this manual.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 91 92

No comments

JAI TMC-4200GE User Manual Page 17