JAI TMC-4200GE User Manual download pdf (Page 31)

Page 19

TM-4200GE Software

Configuring the TM-4200GE Camera

3.4.13 Save/Restore Settings to Your Hard Disk

To save your current settings into the XML file, go to the main menu, select “File” and click on Save

As. The XML file saves all your configurations such as grabber settings, pulse generator, GPIO and

language settings.

The XML file will not, however, save camera parameters such as shutter mode, shutter speed, gain

settings, offset level, scan mode, and LUT. For more information about saving these camera

parameters, please refer to Section 3.4.9, “Memory Pages,” on page 17.

3.4.14 White Balance Control (Color Versions Only)

To determine white balance, use the following steps:

1. Select scan mode A and no binning in the GigE Camera Software tabbed dialog. shown in

Figure 11 on page 10.

2. Start the live video by clicking Start in the Acquisition tab of the Camera Interface Application dia-

log box.

3. Select Color Adjustment under tools in the main menu. Show the camera a piece of white paper to

make sure that the image is not saturated.

4. Click Analyze to automatically calculate the white balance.

5. Once white balance has been calculated, click Apply Results to apply the white balance. You can

also assign custom gain and offset values to the R, G, and B channels. If you choose to assign cus-

tom values, click Apply Results.

FIGURE 22. White Balance Control Settings.

Custom white

balance.

Gain/Offset

Automatic white

balance control.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 91 92

No comments

JAI TMC-4200GE User Manual Page 31