JAI TMC-4200GE User Manual download pdf (Page 20)

Page 8

TM-4200GE Software

Configuring the TM-4200GE Camera

3 Configuring the TM-4200GE Camera

The configuration of the GigE camera consists of two parts:

• The imager configuration (CCD and control circuits)

• The internal frame grabber configuration

The imager can be configured for partial scan, binning, and so on, just like a Camera Link camera. The

internal frame grabber is automatically configured for the pixel type, windowing, image size, I/O and so

on, by the GigE camera software.

3.1 Setup

If you have a peer-to-peer connection between the TM-4200GE camera and your PC without network

switches, your packet size can be the default value (8128 bytes) as shown in Figure 7. However, if you

are connecting the TM-4200GE to your PC through a network switch, then you need to know the

maximum packet size that your network switch supports. Typically, if your switch supports jumbo

packets, then you should keep the packet size to 8128 bytes. If your switch does not support jumbo

packets, then you may need to change the packet size to 1440 bytes.

FIGURE 9. Camera Interface Application Dialog Box

Note: If you connect the

camera through a network

switch, you may need to

modify the packet size.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 91 92

No comments

JAI TMC-4200GE User Manual Page 20