JAI TM-2016-8/8CL User Manual download pdf (Page 23)

Page 13

TM-2016-8 and TM-2016-8CL Progressive Scan Shutter Camera

Installation

2.2.7 (b) JAI, Inc. Power Cables

If you are using JAI, Inc. power cables such as the 12P-02S, please refer to the 12-pin connector pin-out

diagram in “12-Pin Connector (TM-2016-8)” on page 6. The cable pin-out diagram is shown in

Figure 6 below. The color-coded leads use Gray for Ground and Yellow for +12V.

FIGURE 6. 12P-02S Interface Cable (optional)

Note: Make sure that the unused leads are not touching and that there is no possibility that

exposed wires could cause the leads to short.

2.2.7 (c) “K” Series Power Supplies

The “K” series power supplies are designed primarily for OEM users who will be mounting the power

supply inside a protective enclosure. For use in exposed situations, the PD-12UU series power supplies

are recommended.

1. Attach the 110V line cord to the two terminals marked “AC.” Do not plug the cord into a 110V AC

socket until you have completed steps 1 through 3.

2. Attach the Gray and Yellow leads of the power cable to the Ground and 12V DC terminals, respec-

tively.

3. Replace the plastic terminal guard on the power supply.

2.2.7 (d) Building Your Own Power Cable

Refer to the 12-pin connector pin-out in Section 2.2.2 (a on page 6. Connect the Ground lead to pin #1,

and the +12V DC lead to pin #2 of the 12-pin connector. Power must be DC-regulated, and of sufficient

current to properly power the camera.

2.2.7 (e) Attaching the Power Cable to the Connector

The 12-pin connector is keyed and will only fit in one orientation. Follow these directions to properly

attach the power cable to the camera connector:

12P-02S Interface Cable

Pin# Lead Color Function Pin# Lead Color Function

1 Gray GND 7 Black coax VD Input

2 Yellow +12V DC 8 White coax shield N/C

3 Red coax shield GND 9 White coax HD Input

4 Red coax Video 10 Brown RXD

5 Orange coax shield GND 11 Blue Integration

6 Orange coax VINIT IN 12 Black coax shield TXD

HD In (White Coax)

Video Out (Red Coax)

VD In (Black Coax)

Power (Yellow)

+12 V

Analog

Frame Grabber

GND (Gray)

}

Jack

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Comments to this Manuals

No comments

JAI TM-2016-8/8CL User Manual Page 23

Comments to this Manuals

Related products and manuals for Security cameras JAI TM-2016-8/8CL