JAI TM-2016-8/8CL User Manual download pdf (Page 17)

Page 7

TM-2016-8 and TM-2016-8CL Progressive Scan Shutter Camera

Installation

2.2.2 (b) 12-Pin Connector (Camera Link models)

The TM-2016-8 Camera Link cameras have a 12-pin Hirose connector for power input and signal I/O.

Pin #1 is Ground and pin #2 is +12V DC. The pinout table is shown below. For TM-2016-8 Camera

Link model cameras, serial communication camera control is done via the MDR26 Camera Link

connector on the rear panel of the camera.

2.2.2 (c) Digital Output Connector

The TM-2016-8 has a 31-pin AirBorn connector (MP211-031-113-4300) on the rear panel to output 8-

bit, RS-644 video data. The connector pin-out is shown in the figure below.

FIGURE 3. Rear Panel View of Digital Connector

Note: CLK: data clock, LDV: Line Data Valid, FDV: Frame Data Valid, INTEG: Integration

control, EXT CLK: external pixel clock, []: Differential input option.

TABLE 2. 12-Pin Connector (TM-2016-8CL)

Pin Description Pin Description

1 GND 7 VD in

2 +12V DC 8 N/C

3 GND (analog) 9 HD in

4Video out10 N/C

5 GND (digital) 11 Integration Control

6 VINIT in 12 N/C

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

No comments

JAI TM-2016-8/8CL User Manual Page 17