Jai CV-M300 User Manual download pdf (Page 18)

- 17 -

CV-M300

7.4. Location of SW2 and Jumpers

Jumpers are shorted with a 0 Ohm resistor or by a soldering between the 2 points. To remove the solder

tin from a jumper position, use a special tin remover such as de-soldering wick.

7.4.1. Board PK8041 Side A

7.4.2. Board PK8042 Side A

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Jai CV-M300 User Manual Page 18