Jai CV-M536 User Manual

Operation ManualRemote Head Monochrome CCD Camera(Rev.E)CV-M536/538/539

- 9 -CV-M536/538/539CCIR (Non-interlaced / Field accumulation mode)6.3.2. Pulse Width Control ModeThe pulse width control mode will only work in non-i

- 10 -CV-M536/538/539Cautions in the Pulse Width Control Mode.1. Pulse width control mode is effective only in non-interlaced field accumulation mode.

- 11 -CV-M536/538/5396.3.3. Start/Stop Trigger ModeThe Start /Stop trigger will work in 3 modes:1. Interlaced with frame accumulation.2. Interlaced wi

- 12 -CV-M536/538/539Cautions in the Start/Stop Trigger Mode.1. The input of ext. VD signal must be given continuously to synchronize with int. VD sig

- 13 -CV-M536/538/5396.3.4. Long Time Exposure ModeThe Long time exposure will work in 3 modes:1. Interlaced with field accumulation.2. Interlaced wit

- 14 -CV-M536/538/539Cautions in the Long Time Exposure Mode.1. Theoretical exposure time is as follows. EIA: 1/30 sec. to ∞. CCIR: 1/25 sec. to ∞ .2.

- 15 -CV-M536/538/5397. Mode SettingCaution on Mode Setting.Before making any mode or jumper setting turn the power OFF.7.1.1. SW1 Switch on the Rear

- 16 -CV-M536/538/5397.1.4. Ext. Trigger Shutter ModeWhen trigger select SW1-4 is ON. The camera is in ext. trigger shutter mode. The SW1-1, SW1-2 and

- 17 -CV-M536/538/5397.3. Jumper SettingsCaution on Jumper Setting.Before making any mode or jumper setting turn the power OFF.Jumpers for mode settin

- 18 -CV-M536/538/5397.4. Location of SW2 and JumpersJumpers are shorted with a 0 Ohm resistor or by a soldering between the 2 points. To remove the s

CV-M536/538/539DECLARATION OF CONFORMITYAS DEFINED BY THE COUNCIL DIRECTIVE89/336/EECEMC (ELECTROMAGNETIC COMPATIBILITY)WE HEREWITH DECLARE THAT THIS

- 19 -CV-M536/538/5398. Adjustment of Video Signal Output LevelWhen an alignment of a video output signal is required, remove the camera housing and a

- 20 -CV-M536/538/5399. External AppearanceUnit : mm (inches)9.1 CCU9.2 HEADa)CV-M536b)CV-M538/539

- 21 -CV-M536/538/53910. SpecificationsScanning system CCIR 625 lines EIA 525 lines25 frames/sec. 30 frames/sec.CCD sensor Monochrome 1/2" Hyper

- 22 -CV-M536/538/53911. Appendix11.1. PrecautionsPersonnel not trained in dealing with similar electronic devices should not service this camera.The

JAI America, Inc., USASuite 45023046 Avenida de la CarlotaLaguna Hills, CA 92653USAPhone +1 949 472 5900Fax +1 949 472 5908www.jai.comJAI Corporation,

- 2 -CV-M536/538/539Table of ContentsTable of Contents ...

- 3 -CV-M536/538/5391. GeneralThe model CV-M536 series is a new remote micro-head camera system featuring virtually identicalperformance and function

- 4 -CV-M536/538/5393. Main Features• Miniature-sized remote head - ø17mm (0.67")• 1/2" Hyper HAD interline transfer CCD imager, 768(H) x 49

- 5 -CV-M536/538/5394. Locations and Functions4-1. CCU4-2. HEADa)CV-M536b) CV-M538/5391 12P connector : To connect camera head with camera control uni

- 6 -CV-M536/538/5395. Pin Assignment5.1. 12-pin Multi-connector (DC-IN/SYNC.)Type: HR10A-10R-12PB (Hirose) maleSeen from rear.Notes:*1) Signals on pi

- 7 -CV-M536/538/5396. Functions and Operations6.1. Input/Output of HD/VD Signal6.1.1. Input of External HD/VD SignalAs factory setting the camera can

- 8 -CV-M536/538/539To use this modeSet: SW1-4 to ON for ext. trigger shutterSW1-5 to OFF for field accumulationSW1-6 to ON for non-interlacedSW1-1,2