Jai CV-M10 User Manual

Browse online or download User Manual for Video surveillance systems Jai CV-M10. JAI CV-M10 User Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - Operation Manual

Operation ManualProgressive Scan Camera(Rev.F)CV-M10

Page 2 - DECLARATION OF CONFORMITY

CV-M10BX/CV-M10RS- 7 -6.5. Timing diagram for Pulse Width Control

Page 3 - Table of Contents

- 8 -CV-M10BX/CV-M10RS7. Mode Settings7.1. Mode Setting by SwitchThe mode setting switch SW1 on rear for CV-M10BX and CV-M10RS is different for switch

Page 4 - 3. Main Features

CV-M10BX/CV-M10RS- 9 -7.2. Shutter Time select.Before making any mode or jumper settings switch the power off.The shutter select is for CV-M10BX done

Page 5 - 4. Locations and Functions

- 10 -CV-M10BX/CV-M10RS7.4.2. Non interlaced modeWith SW1-5 ON the camera is in non-interlaced mode. The video is read out on video 1 as a full progre

Page 6 - 5. Pin Assignment

CV-M10BX/CV-M10RS- 11 -8. Jumper settingsSwitch off the power before making any mode or jumper settings.The following modes are available with jumper

Page 7 - 6. Functions and Operation

- 12 -CV-M10BX/CV-M10RS8.6. Locations of JumperJumpers positions are shorted with a 0 ohm resistor or by a soldering between the 2 points. To remove t

Page 8

CV-M10BX/CV-M10RS- 13 -8.6.3. Location of Jumper for CV-M10BX on PK8206AJumpers for selecting random trigger modes for CV-M10BX. It is edge pre-select

Page 9

- 14 -CV-M10BX/CV-M10RS9. Internal adjustments on BXFor CV-M10BX there are internal potentiometers for adjusting the two video outputs. Do not touch t

Page 10 - CV-M10BX/CV-M10RS

CV-M10BX/CV-M10RS- 15 -10. CV-M10RS Camera Control ToolA camera control tool for CV-M10RS is available. It runs under Windows 98 and NT.After installa

Page 11 - 7. Mode Settings

- 16 -CV-M10BX/CV-M10RS10.5. Levels Window10.6. Files and Camera10.7. Communication Window

Page 12

CV-M10BX/CV-M10RSDECLARATION OF CONFORMITYAS DEFINED BY THE COUNCIL DIRECTIVE89/336/EECEMC (ELECTROMAGNETIC COMPATIBILITY)WE HEREWITH DECLARE THAT THI

Page 13

CV-M10BX/CV-M10RS- 17 -11. External Appearance and DimensionsUnit : mm (inch)

Page 14 - 8. Jumper settings

- 18 -CV-M10BX/CV-M10RS12. SpecificationsModel CV-M10CCD Sensor 1/2" Interline-Transfer TypeImage Area 6.4mm (H) x 4.8mm (V)Number of Elements 65

Page 15

CV-M10BX/CV-M10RS- 19 -13. Appendix13.1. PrecautionsPersonnel not trained in dealing with similar electronic devices should not service this camera.Th

Page 16

- 20 -CV-M10BX/CV-M10RS11. User’s RecordCamera type: CV-M10BX/CV-M10RS CCIR/EIARevision: (Revision F)Serial No. ...Users Mode SettingsU

Page 17 - 9. Internal adjustments on BX

JAI America, Inc., USASuite 45023046 Avenida de la CarlotaLaguna Hills, CA 92653USAPhone +1 949 472 5900Fax +1 949 472 5908www.jai.comJAI Corporation,

Page 18

CV-M10BX/CV-M10RSTable of Contents1. General ...

Page 19

CV-M10BX/CV-M10RS- 1 -1. GeneralThe CV-M10 is a compact monochrome progressive scan camera designed for automated imaging applications. The 1/2"C

Page 20

- 2 -CV-M10BX/CV-M10RS4. Locations and Functions93 5 64 8 7121. Lens mount of C-mount type. *1)2. Interline-transfer CCD sensor with on-chip micro len

Page 21 - 12. Specifications

CV-M10BX/CV-M10RS- 3 -5. Pin Assignment5-1. 12-pin Multi-connector (DC-IN/SYNC.)Type: HR10A-10R-12PB-01 (Hirose) male seen from rear.Notes: *1) Signal

Page 22 - 13. Appendix

- 4 -CV-M10BX/CV-M10RS6. Functions and OperationApart from the standard continuous operation, the CV-M10 features two external asynchronous trigger mo

Page 23 -

CV-M10BX/CV-M10RS- 5 -6.3. External Trigger ModeExternal trigger mode of CV-M10 allows 2 different driving modes:1 Edge Pre-select mode. (Asynchronous

Page 24 - 2700- 11052 E F3 0901

- 6 -CV-M10BX/CV-M10RSThe resulting video signal will start to be read out after the trigger rising edge. The WEN pulse indicates the start of validvi

Comments to this Manuals

No comments